Circuit breaker for DC
The BHACB1-DC module consists of 3 security machines that are independent from each other. Each security machine can be configured to a DC (DC) between 0.5A and 30A in steps of 0,5 A. In addition, the current / time characteristic can be set over 5 points.
The module was designed in a way that allows the connection to the network via the Ethernet Gateway BHEG1.
As soon as the BHACB1-DC is connected to the Ethernet Gateway, the configuration of the fuses is supported by a graphic web interface.
|Processor||Automotive 8051MCU @ 48MHz|
|WAGO high power cage clamps||1GB / 2GB / 4GB / 8GB / 16 GB / 32GB|
|5 pole RS485 connector|
|7 segment LED display||indicating the operation mode of the fuse|
|yellow LED||indicating the fuse status (ON/OFF)|
|blue LED||indicating the status of the galvanic insulation|
|Programmable cut of current between 0,5A and 30A in 0,5A steps.|
|Programmable characteristic curve with up to 5 supporting points|
|3 fuses in one fuse module|
|Up to 5 fuse modules can be connected to one Ethernet Gateway (on the fly)|
|Cut-off of every pole (positive and negative)|
|Cut-off in case of an leakage current (earth leakage circuit breaker)|
|Safety mode for service and installation|
|Installation on a standard cap rail||IP67|
|Dimensions (W x H x D)||133mm x 165mm x 75mm|
|Shock and vibration||EN61373 Category 1 Class B|
|Operating temperature||-30°C … +75°C|
|Storage temperature||-40°C … +85°C|